1200m³/h Isihluzi sePump yePump yeVacuum eboniswayo

1200m³/h Isihluzo soGutyulo lwePump yePump

LVGE Ref.:LA-261Z

Isingeniso/Isiphumo:I-ISO100 (DN100)

Imilinganiselo yezindlu:568*309*370*234(mm)

Imilinganiselo yesihluzo sesiqalelo:Ø270*380(mm)

Ukuqukuqela okusebenzayo:1200m³/h

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Umsebenzi:

Ukuba kukho uthuli kwimeko yokusebenza, iya kutsalwa yimpompo ye-vacuum. Ngeli xesha, abasebenzisi banokufaka esi sihluzo sothuli kwindawo yokungena yempompo yokucoca ukucoca uthuli olufakwe ngaphakathi. Oku kukhusela igumbi lempompo yokufunxa kunye neoyile yempompo yokufunxa. Oku kunokwandisa ubomi benkonzo yempompo yokucoca. Abasebenzisi badinga kuphela ukugcina impompo yokufunxa ngamaxesha athile.

FAQ:

1.Ingaba igobolondo yale mveliso yenziwe nge-carbon steel material? Ngaba ungabonelela ngeqokobhe lensimbi engenasici?

Ewe. Ngokuqinisekileyo. Sinokubonelela ngezinto zensimbi ezingenasici ezifana ne-304 kunye ne-316.

2.Ziziphi iingenelo zale mveliso?

Okokuqala, iqokobhe lale mveliso lithatha itekhnoloji ye-carbon steel seamless welding, kwaye izinga lokuvuza kwevacuum lifikelela kwi-1 * 10.^-3I-Pa/L/S. Okwesibini, umphezulu wayo wamkela itekhnoloji yonyango lokutshiza i-electrostatic, eyenza ibe namandla okuthintela umhlwa. Okwesithathu, le mveliso iza negeyiji yoxinzelelo olwahlukileyo enokuthi ikhumbuze abasebenzisi ukuba batshintshe into yokucoca. Ngaphezu koko, sinokubonelela ngeenkonzo zokwenza ujongano ngokwezifiso.

3.Indawo yokusebenza ingaphantsi kwama-200 degrees celcius kwaye inomlinganiselo othile wokudleka. Yeyiphi imathiriyeli yesihluzo esimele sikhethwe?

Ndincoma ukusebenzisa izinto zokucoca intsimbi. Nangona ineendleko eziphezulu, inokuhlanjululwa ngokuphindaphindiweyo kwaye isetyenziswe. Ukuchaneka kwayo kuncinci, kunye neenketho ezifana ne-200 mesh, i-300 mesh, i-500 mesh, njl njl ukuba ukhethe.

4.Yiyiphi into yokucoca ifanelekileyo yokusetyenziswa kwiindawo ezinomswakama ngaphantsi kwe-100 degrees Celsius, ekwazi ukuhluza iincinci ze-6 microns zothuli, kwaye ingahlanjwa kwaye isetyenziswe kwakhona, ngexabiso eliphantsi kunensimbi engenasici?

Ndincoma ukusebenzisa i-polyester engalukiweyo impahla yelaphu kwiikhatriji zokucoca.

5.Umthengi ufuna ukusebenzisa i-polyester engalukiweyo yesihluzo selaphu elinokucoca i-0.3 microns uthuli lwamasuntswana. Ngaba ungabonelela ngayo?

Ngokuqinisekileyo.

6.Umthengi ufuna ukuhluza ezomileyo ze-5 microns uthuli lwamasuntswana kwiqondo lokushisa elingaphantsi kwe-100 degrees Celsius. Umthengi unohlahlo lwabiwo-mali oluphantsi, yeyiphi into yokucoca into ekufuneka ikhethwe ukuze isebenze ngcono? Injani impumelelo yokucoca?

Ndincoma ukusebenzisa i-filter element eyenziwe nge-wood pulp paper material. Ukuhluza amasuntswana othuli lwe-5 microns kunokufikelela kubuchule bokucoca obungaphezulu kwe-99%.