LVGE FILTER

“LVGE Solves Your Filtration Worries”

The OEM/ODM of filters
for 26 large vacuum pump manufacturers worldwide

banner

Products

F004 Vacuum Pump Air Filter(40~100m³h)

LVGE Ref.: LA-201Z

OEM Ref.: F004

Element Dimensions: Ø100*60*70mm

Interface Size: G1-1/4”

Nominal Flow: 40~100m³/h 

Function: In order to prevent dust particles entering the vacuum pump chamber and causing the pollution of the chamber and the vacuum pump oil, the user can install the intake filter at the intake port. It can decrease the mechanical wear and extend the life of the vacuum pump.


Product Detail

Product Tags

FAQ

  • 1.What material is the shell?
  1. It adopts carbon steel with seamless welding technology.
  • 2.Does the shell have rust resistance?
  1. Yes. Electrostatic spraying technology is used on the surface, which gives it good rust resistance.
  • 3.What is its vacuum leakage rate?
  1. 1*10-2Pa/L/S.
  • 4.Can the interface size be customized according to my requirements?
  1. Yes. Please kindly make a note with our business personnel.
  • 5.How many kinds of filter materials are there?
  1. There are three filter materials - stainless steel, polyester non-woven and wood pulp paper.
  • 6.How to determine which filter material is suitable for my working conditions?
  1. When the temperature is below 100 degrees Celsius, you can choose wood pulp paper and polyester non-woven. The difference between them is that the later can be used in humid environments, but the former can’t. For use in a high temperature environment below 200 degrees Celsius or a corrosive environment, it is recommended to use stainless steel. It can be repeatedly washed and used, but the filtration accuracy of it is low compared with the other two filter materials.
  • 7.What about the price of these three materials?
  1. Wood pulp paper is the most affordable, followed by polyester non-woven, and stainless steel is the most expensive.
  • 8.What are the filtration accuracy of these three materials respectively?
  1. a.General Wood pulp paper is for 2 micron with filtration efficiency of more than 99%, as well as the one of the other type for 5 microns.
  2. b.Polyester non-woven is for 6 micron with the efficiency of more than 99%. If you want to filter 0.3 micron dust particles, you can choose the other one made of composite material. Its filtration efficiency can reach more than 95%.
  3. c.The typical specifications of stainless steel is 200 mesh, 300 mesh and 500 mesh. Others include 100 mesh, 800 mesh and 1000 mesh, etc.

Product Detail Picture

IMG_20221111_094319
IMG_20221111_101718

27 tests contribute to a 99.97% pass rate!
Not the best, only better!

Leak Detection of Filter Assembly

Leak Detection of Filter Assembly

Exhaust Emission Test of Oil Mist Separator

Exhaust Emission Test of Oil Mist Separator

Incoming Inspection of Sealing Ring

Incoming Inspection of Sealing Ring

Heat Resistance Test of Filter Material

Heat Resistance Test of Filter Material

Oil Content Test of Exhaust Filter

Oil Content Test of Exhaust Filter

Filter Paper Area Inspection

Filter Paper Area Inspection

Ventilation Inspection of Oil Mist Separator

Ventilation Inspection of Oil Mist Separator

Leak Detection of Inlet Filter

Leak Detection of Inlet Filter

Salt Spray Test of Hardware

Leak Detection of Inlet Filter


  • Previous:
  • Next:

  • Write your message here and send it to us